How To Fix ‘DNS_Probe_Finished_Bad_Config’ Error in Chrome


DNS_Probe_Finished_Bad_Config When a person uses a web browser like Google Chrome on a regular basis, they may encounter a configuration problem. DNS errors are browser problems that prohibit you from accessing a specific web domain.

It means your computer’s DNS setting is incorrect, which prevents it from establishing a strong network connection. This error appears when a web address that a user is looking for is unavailable. Other search engines may also experience this issue, but with a different error message.


This type of mistake isn’t exclusive to any website, thus it can appear on any of them. It’s also not browser-specific, so you can get this issue using Chrome, Mozilla Firefox, Safari, Opera, or any other web browser.

Because Google Chrome is so widely used, the number of complaints from Chrome users is naturally higher. This type of problem has also been reported by Android users. They are seeing this error as a result of a router configuration issue.

Read Also:

  1. Steam Disk Write
  2. Outlook Keeps Asking For Your Password
  3. VAC was Unable to Verify Your Game Session

Understanding DNS Probe Finished Bad Config: An Overview

The “DNS Probe Finished Bad Config” error is a common DNS-related error message that users may encounter while attempting to access a website using a web browser.

DNS serves as the internet’s address book, translating domain names (such as into IP addresses (such as that computers can understand.

When a user enters a domain name into their web browser, the browser queries the DNS server to obtain the corresponding IP address and establish a connection to the website.

However, if there is an issue with the DNS configuration, the browser may fail to resolve the domain name, resulting in the DNS Probe Finished Bad Config error.

Common Causes of DNS Probe Finished Bad Config Error

Several factors can contribute to the DNS Probe Finished Bad Config error, ranging from network issues to DNS configuration problems. Understanding these potential causes is essential for effectively troubleshooting the issue and implementing appropriate solutions. Some common causes of the DNS Probe Finished Bad Config error include:

1. Incorrect DNS Settings

One of the most common causes of the DNS Probe Finished Bad Config error is incorrect DNS settings configured on the user’s device or network. If the DNS server addresses are misconfigured or outdated, the browser may fail to resolve domain names properly, resulting in DNS-related errors.

2. Network Connectivity Issues

Network connectivity issues, such as a weak or unstable internet connection, can also trigger the DNS Probe Finished Bad Config error. If the user’s device is unable to establish a stable connection to the DNS server, it may encounter difficulty resolving domain names and accessing websites.

3. DNS Cache Corruption

DNS cache corruption occurs when the cached DNS data stored on the user’s device becomes outdated or corrupted. If the DNS cache contains incorrect or invalid information, it may prevent the browser from resolving domain names correctly, leading to DNS-related errors such as the DNS Probe Finished Bad Config error.

4. Firewall or Security Software Interference

Firewall or security software installed on the user’s device may interfere with DNS resolution and cause the DNS Probe Finished Bad Config error. If the firewall or security software blocks or restricts access to the DNS server, it may prevent the browser from resolving domain names properly, resulting in connectivity issues.

DNS_Probe_Finished_Bad_Config Error Solutions

Whenever we encounter a new error, we attempt to remedy it in a variety of methods. These methods are discussed farther down in this text.

Method 1: Manually configure DNS

Step 1: To begin, go to the control panel and click Network and Sharing Center.

Step 2: Next, select Change adapter settings from the drop-down menu. Choose LAN and then Properties.

Step 3: Next, pick Internet Protocol Version 4 (TCP/IPV4) from the drop-down menu. Select Use the Following DNS Server Addresses after that.

Step 4: Type in your favourite address bar. is the alternate address bar type.

Step 5: When you’re ready to go, select Validate settings.

Step 6: Finally, restart your computer. Also, look for any issues in Windows, such as Unidentified Network No Internet Access.

The DNS_Probe_Finished_Bad_Config error notice will not appear on your screen once the DNS has been manually configured. If the preceding approach does not work, try one of the additional methods listed below.

Method 2: Reset IP Configuration 

IP configuration can also produce the DNS_Probe_Finished_Bad_Config error. Resetting the IP settings will fix the problem. The following are the steps to resetting IP configuration –

Step 1: First, open the Run dialogue box by clicking on the Start button.

Step 2: Type “cmd” in the run command. After that, hit the enter key.

Step 3: Type the following commands in the command window –

int ip reset netsh

reset winsock netsh



Step 4: Finally, restart the system to see if the problem has been resolved.

If the problem still persists, consider some of the other options listed below.

Method 3: Clear Cookies, Cache, and Temporary Files 

The DNS_Probe_Finished_Bad_Config error is produced by a build-up of temporary files on the user’s system. Your browser saves temporary files on your hard drive so that it can retrieve them fast afterwards to improve your browsing experience.

Sometimes, you could see the DNS error when some of these files are corrupt. The DNS problem is sometimes caused by a faulty cache. Clearing all cookies, cache, and other temporary files is a straightforward way to solve this problem. The ways to remove these files are as follows –

Step 1: Check cookies and cache items using the Ctrl+Shift+Del keys.

Step 2: After that, select Clear Data.

Your system’s cookies, cache, and temporary files have now been cleared. The error would be resolved if you closed and restarted the browser. If this method likewise fails, we have other options for dealing with the problem.

Method 4: Update Network Drivers 

The majority of customers do not update their software on a regular basis, resulting in DNS issues. When software is updated, the developers repair any flaws that are there in order to improve the software’s performance.

As a result, replacing the drivers can also fix the DNS_Probe_Finished_Bad_Config problem. The following are the measures to take:

Step 1: To begin, press the Windows Key+X combination. Select Device Manager from the menu.

Step 2: Make sure the drivers are up to date. If drivers are detected, they should be updated.

Step 3: Finally, restart the computer.

If the error was caused by an out-of-date driver in your system, the problem would have been resolved. However, if the issue persists, try the additional solutions listed below.

Method 5: Disable Firewall and Antivirus Programs 

Windows security tools such as antivirus and firewall are sometimes to blame for DNS problems. If they discover a website dubious, they block it. To resolve this issue, we must disable the system’s firewall and antivirus.

When we stop our firewall and antivirus, however, our system becomes vulnerable to viral attacks, which might lead to system failure. If this method resolves your DNS_Probe_Finished_Bad_Config error, you should switch to a different antivirus programme to keep your system safe.

Method 6: Disconnect and Reconnect to the Network 

This procedure will only work if there is a problem with your LAN’s router. The DNS_Probe_Finished_Bad_Config problem could be resolved by disconnecting and rejoining to the network. Follow these steps to do so:

Step 1: To begin, go to your task bar and click the Network icon. Disconnect from the network you’re connected to it. Check for any errors, such as DNS Server Not Responding.

Step 2: Now turn off the router and wait a few minutes before turning it back on.

Step 3: Finally, join the network.

Your problem would be resolved if there was a problem with your router. If it doesn’t work, try approach 7.

Method 7: Using a Different Browser 

When viewing some websites, a web browser encounters various challenges. Check if you’re seeing Err Network changed in Google Chrome, for example.

It affects not only you, but everyone who uses that browser. Try accessing the web address using a different web browser to see whether your browser is malfunctioning.

If the DNS_Probe_Finished_Bad_Config error does not appear, your browser should be discarded or uninstalled until the new update is available.

Read Also:

  1. MSVCP140.dll is Missing
  2. Antimalware Service Executable
  3. Ethernet Doesn’t Have a Valid IP Configuration


The strategies provided above will assist you in resolving the DNS_Probe_Finished_Bad_Config problem in your computer. I am confident that at least one of the seven approaches will be beneficial to you.

The procedures given in this article will not only repair this error on a Windows PC or a Mac, but they will also fix this error on an Android device. However, if you are dealing with computer system failures, always retain a backup of your vital data, since even a tiny mistake might cause it to be lost.


Please enter your comment!
Please enter your name here